Hire
left_bottom_img.jpg

Industrial Tool Hire & Advice

Jonel offers a full Industrial Tool Hire Service

Jonel Hydraulics has a wide range of industrial hire equipment which has been used on some of NZ’s largest infrastructure projects. Our hire fleet includes all common lifting and jacking equipment and accessories, as well as specialised hydraulic equipment for projects above ordinary requirements.

In addition to dry hire of equipment, Jonel can install equipment, take down equipment and design one-off lifting applications for clients.

Our on-site back up support is available to deal with unforeseen problems quickly and efficiently, minimising hassles and maximising your efficiency on the job.

To enquire further email George or phone George on +64 9 274 9294 to discuss your needs.

See our hire brochure here. 

Examples of Hydraulic Tooling for Hire

 
100 Ton plus Cylinders
Applications: Primary Lifting, Bridge Lifting & Reposition, Forklift/Digger Maintenance, Rail Recovery, Moving/Lifting large objects
 
100 Ton plus Hollow Cylinders
Applications: Primary Lifting, Bridge & Strand Tensioning, Bridge Reposition, Forklift/Digger Pin Removable, Pulling large objects
20 to 60 Ton Hollow Cylinders
Applications: Primary Lifting, Strand Tensioning & Reposition, Forklift/Digger Pin Removable, Pulling/Holding large objects
 
50 Ton Cylinders
Applications:  Primary Lifting, Bridge Lifting & Reposition, Forklift/Digger Maintenance, Rail Recovery, Moving/Lifting large objects
 
Torque Wrench Equipment
Primary applications: Bolting of Oil/Gas Pipe Lines, Construction & Building, Bridge Reposition, Forklift/Digger Maintenance, General Machine Maintenance. See our torque wrench hire brochure here.
 
Pumps, Manifolds & Hosing
Primary applications: To Power Cylinders, etc for Construction & Building Industries, Bridge Manufacture, Stressing, Forklift/Digger Maintenance, Rail Maintenance, Torque Wrench Applications, General Maintenance
 

Examples of Industrial Equipment for Hire

  • RAC1006 100T Alloy Cylinders
  • RC Series 5 to 100T Cylinders
  • RRH Series 60 to 100T Hollow Cylinders
  • RCH Series 13 to 100T Hollow Cylinders
  • CLL 50 to 100T Lock-Nut Cylinders
  • 2,3,6,10 & 15 Meter Hose Sets
  • PAT Series Air Pumps
  • ZU Series Electric Pumps
  • ZE Series Electric Pump
  • P Series Hand Pumps
  • 2, 4 & 6 Port Manifolds

To enquire further email George or phone George on +64 9 274 9294 to discuss your needs.

See our hire brochure here.
Jonel Hydraulics has over 25 years experience in RAM Reconditioning and Cylinder Repairs. We can also help with Industrial Tooling Sales, Hire and Advice; Mobile Services and Custom Builds.
Contact Jonel Hydraulics by email on sales@jonel.co.nz or phone +64 9 274 9296