• Enerpac GF-Series hydraulic force and pressure gauges are calibrated with dual scale reading for pressure and force in bar and kN
  • All hydraulic pressure sensing parts are sealed and dampened by glycerine for long life
  • Calibrated with dual scale reading for pressure in bar and psi
  • Excellent readability: gauge face dimensions 100 mm
  • Fast, easy installation
  • Stainless steel gauge cases for corrosion resistance
  • View the catalogue.

Category:
For use with
cylinders
Gauge Calibration Units per
division
Model
Number
Thread Required
Gauge Adaptor
Model Nr.
psi bar kN bar kN psi NPTF
all 0 – 10.000 0 – 700 – 10 – 100 GP-10S 1/2″ GA-2
all 0 – 15.000 0 – 1000 – 10 – 200 GP-15S 1/2″ GA-2
5 ton – 0 – 700 0 -45 10 0,5 – GF-5B 1/2″ GA-2
10 ton – 0 – 700 0 – 100 10 1 – GF-10B 1/2″ GA-2
25 ton – 0 – 700 0 – 232 10 2 – GF-20B 1/2″ GA-2
RC, RR 50 ton – 0 – 700 0 – 500 10 5 – GF-50B 1/2″ GA-2
RCH 13 ton – 0 – 700 0 – 124 10 1 – GF-120B 1/2″ GA-2
RCS-201, 302 – 0 – 700 0 – 175 / 275 10 2 + 5 – GF-230B 1/2″ GA-2
RCS-502, 1002 – 0 – 700 0 – 450 / 900 10 5 + 10 – GF-510B 1/2″ GA-2
RCH-202, 302, 603 – 0 – 700 0 – 210 / 320 / 570 10 5 – GF-813B 1/4″ GA-3
25, 30, 50 ton – 0 – 700 0 – 232 / 300 / 500 10 5 – GF-835B 1/4″ GA-3
75, 100 ton – 0 – 700 0 – 720 / 930 10 10 – GF-871B 1/4″ GA-3
150, 200 ton – 0 – 700 0 – 1400 / 2000 10 25 – GF-200B 1/4″ GA-3

For GF-series force gauges with scale reading in psi and lbs change “B” into “P” in model number. Example: GF-50P.

 


PHONE Auckland: +64 9 274 9296
Christchurch: +64 3 348 9082
Tollfree: 0800 566 357 (JONELS)